🧩 YTL Quick Mix Tile Adhesive 361 – 25 KG Polymer-Modified (C2TE)
📦 Packaging & Certification
🌟 Benefits at a Glance
🧱 Ideal Applications
🧪 Mixing & Application Guide
❓
People Also Ask
📌 Summary
☎️ Call to Action
🧩 YTL Quick Mix Tile Adhesive 361 – 25 KG Polymer-Modified (C2TE)Engineered for strong, smart tile installation across interior and exterior surfaces, YTL Quick Mix Tile Adhesive 361 is a polymer-modified, premixed cement adhesive that sets the standard for performance. With slip resistance and extended open time, it’s perfect for installing ceramic, porcelain, mosaic, and homogeneous tiles of small to medium sizes.📦 Packaging & CertificationPack Size: 25 KG per bagCertifications:EN 12004 – Class C2TE (improved adhesive with slip resistance and extended open time)SIRIM Eco LabelSingapore Green Label (low VOC, environmentally friendly)Shelf Life: Use within 6 months of manufacture if stored in dry, covered conditionsAppearance: Grey powder mix with polymer blend and graded silica sand fillers🌟 Benefits at a Glance✅ Premixed Single-Component: Just add water—no onsite blending errors✅ Superior Bond Strength: Reliable adhesion on both porous and non-porous tiles✅ Slip-Resistant (T): Suitable for wall and floor tiling without back-popping✅ Extended Open Time (E): Adjustable for up to 30 minutes after application✅ Weather Resistant & Durable: Ideal for humid Malaysian conditions
🧱 Ideal ApplicationsSmall to medium tiles:Internal walls: up to 300 × 600 mmInternal floors: 600 × 600 mm belowExternal walls/floors: up to 300 × 600 mm (floor) or 300 × 300 mm (wall)Surfaces: concrete, rendered surfaces, screed, block wallsPerfect for bathrooms, kitchens, corridors, and general wall/floor tiling in both internal and external settings🧪 Mixing & Application GuideStepInstructionSurface PrepBase must be clean, sound, and properly cured: ≥4 weeks for brick/concrete walls, ≥7 days for render/screed. Remove dust, paint, or debris.Mixing RatioAdd ~6.25 L of clean water to each 25 KG bag (water:powder ≈0.24–0.26)Mixing ProcessUse electric mixer for 3–5 minutes until homogeneous. Let sit 3–5 minutes, remix before use.Apply AdhesiveUse notched trowel: 6×6 mm for wall tiles, 10×10 mm for floors. Place tiles within ~20 min and adjust within 30 min.Pot LifeApprox. 2 hours under typical site conditions.CuringAvoid wetting or foot traffic for 24 hrs. Light traffic allowed after 4 days; heavy use after 14 days.
❓
People Also Ask
Q: Can YTL Quick Mix Tile Adhesive 361 be used outdoors?Yes, it is designed for both internal and external tile installation on suitable surfacesQ: What tile sizes are supported?Supports Below 600 × 600 mm for floors internally, and up to 300 × 600 mm or 300 × 300 mm externally (depending on orientation)Q: Does it offer slip resistance?Yes, it’s classified as T in EN 12004 (limited slip), making vertical tiling secure and stableQ: What coverage can be expected per bag?Approximately 6.5–7 m² at 2.5 mm thickness for 300 × 300 mm tiles; for larger sizes coverage will be lowerQ: How long can you adjust the tiles after placing?The adhesive allows ~30 minutes of adjustability before set begins, giving flexibility on-site📌 SummaryYTL Quick Mix Tile Adhesive 361 in a 25 KG pack is your trusted cement-based adhesive for small to medium tile installations, both indoor and outdoor. With superior adhesion, extended open time, and consistent polymer performance, it’s widely chosen by installers across Kuala Lumpur, Selangor, and West Malaysia.☎️ Call to ActionReady to stock up or need technical help for your tiling job? Contact us now for pricing, delivery details, or installation advice across West Malaysia. Let’s get your tile job done right!