Table of Contents
Do not index
Do not index
1. Product Snapshot
Infini-Tint Automotive Series uses magnetron-sputtered titanium–nitride and nano-ceramic layers to filter heat, glare and harmful radiation while keeping your signal reception crystal-clear. Every roll is spectrally tuned for Malaysian sunlight and certified to comply with JPJ’s Visible Light Transmission (VLT) regulations.
2. Performance Line-up
Series | Target Use | VLT* | IR Rejection** | UV Block | JPJ Position |
RC 70 (Clear-Shield) | Windscreen | 70 % | 88 % | 99 % | Legal front windscreen (≥70 % VLT) |
SP 50 (Neutral-Guard) | Front side | 52 % | 91 % | 99 % | Legal front side windows (≥50 % VLT) |
SP 30 (Privacy-Plus) | Rear & hatch | 32 % | 95 % | 99 % | Rear windows—no VLT limit† |
SPW 20 (Ultimate Privacy) | Full cabin, fleet | 22 % | 97 % | 100 % | Rear windows / fleet & VIP |
- VLT = Visible Light Transmission.
** IR figures at 1 400 nm laboratory wavelength.
† Malaysia’s 2019 regulations removed VLT limits for rear side and rear screens, provided front glass complies.
3. Why Drivers Choose Infini-Tint
- Solar Heat Rejection up to 95 %
Cabin stays 5–7 °C cooler; air-conditioner cycles less, saving fuel and battery range (for EVs).
- 100 % UV-A/UV-B Blocking
Shields skin from sun damage and prevents interior fading.
- Low-Glare, High-Clarity
Night-time visibility remains sharp; daytime dazzle is reduced by up to 60 %.
- No Signal Interference
Nano-ceramic tech lets GPS, SmartTAG, toll RFID and 5G signals pass through freely.
- Enhanced Safety
2-ply, 4 mil construction holds shattered glass together during impact or attempted break-ins.
- Warranty
Covers bubbling, peeling, colour change and adhesive failure for as long as you own the vehicle.
4. Installation Process
- Pre-Tint Check — VLT meter reading & glass inspection; we log before/after values.
- Clean-Room Prep — Door panels masked (see photos), lint-free wash, de-ionised spray.
- Computer-Cut Film — Perfect edges, no blade marks on weather-strip.
- Low-Moisture Application — Minimises cure time; windows usable in 24 h.
- Post-Tint QA — Final VLT reading, bubble scan, and care sheet hand-over.
Mobile units cover Klang Valley. Workshop appointments also available.
5. Frequently Asked Questions
Q1: Will SmartTAG, GPS, or 5 G signals drop after tinting?
No. Our nano-ceramic films are 100 % metal-free in the RF band, so there’s zero interference.
Q2: Can I choose darker film for the front windshield?
Malaysian law caps the windscreen at 70 % VLT. We recommend RC 70 to stay compliant and still enjoy high IR rejection.
Q3: How long does installation take?
A sedan: ~2 hours. An MPV/SUV: 2.5–3 hours. Mobile service adds ~30 min setup.
Q4: What if my tint bubbles years later?
Just contact us with your warranty card; we’ll replace the affected glass free of charge.
6. Ready for a Cooler, Safer Ride?
Ask for a free VLT check or an on-site demo—our team will respond within one business day.
